|
Legrand / Raritan / Server Technology Xerus™ JSON-RPC API
|
Overcurrent protector trip sensor interface. More...
import <TransferSwitchBypassStateSensor.idl;
Public Member Functions | |
| void | acknowledgeFault () |
| Acknowledge communication fault as expected. | |
Public Member Functions inherited from sensors::StateSensor | |
| State | getState () |
| Get the sensor state. | |
Public Member Functions inherited from sensors::Sensor | |
| TypeSpec | getTypeSpec () |
| Retrieve the sensor type specification. | |
| boolean | isTypeChangeAllowed () |
| Check whether the sensor type can be changed using setType(). | |
| int | setType (in int type, in int unit) |
| Set sensor type and unit. | |
Public Attributes | |
| constant int | STATE_ACTIVE_INLET_MASK = 0x7 |
| Active inlet, can be 0 (off), 1 or 2. | |
| constant int | STATE_IS_BYPASS_SELECTED = 0x8 |
| Whether the "bypass" position is selected. | |
| constant int | STATE_FAULT = 0x10 |
| If set, communication to the bypass controller failed unexpectedly. | |
Public Attributes inherited from sensors::Sensor | |
| constant int | ERR_NOT_SUPPORTED = 1 |
| The operation is not supported. | |
| constant int | NUMERIC = 0 |
| Sensor reading type | |
| constant int | DISCRETE_ON_OFF = 1 |
| Sensor has two discrete readings: 0 (off) and 1 (on), see OnOffState | |
| constant int | DISCRETE_MULTI = 2 |
| Sensor has multiple discrete readings | |
| constant int | UNSPECIFIED = 0 |
| Sensor type | |
| constant int | VOLTAGE = 1 |
| Voltage. | |
| constant int | CURRENT = 2 |
| Current. | |
| constant int | UNBALANCE_CURRENT = 3 |
| Current unbalance. | |
| constant int | POWER = 4 |
| Power. | |
| constant int | POWER_FACTOR = 5 |
| Power factor. | |
| constant int | ENERGY = 6 |
| Energy. | |
| constant int | FREQUENCY = 7 |
| Frequency. | |
| constant int | TEMPERATURE = 8 |
| Temperature. | |
| constant int | HUMIDITY = 9 |
| Relative humidity. | |
| constant int | AIR_FLOW = 10 |
| Air flow. | |
| constant int | AIR_PRESSURE = 11 |
| Air pressure. | |
| constant int | CONTACT_CLOSURE = 12 |
| Contact Closure [uses NormalAlarmedState mapping]. | |
| constant int | ON_OFF_SENSOR = 13 |
| Switch state [uses OnOffState mapping]. | |
| constant int | TRIP_SENSOR = 14 |
| Circuit breaker tripped [uses OpenClosedState mapping]. | |
| constant int | VIBRATION = 15 |
| Vibration [uses NormalAlarmedState mapping]. | |
| constant int | WATER_LEAK = 16 |
| Water leak [uses NormalAlarmedState mapping]. | |
| constant int | SMOKE_DETECTOR = 17 |
| Smoke detector [uses NormalAlarmedState mapping]. | |
| constant int | TOTAL_HARMONIC_DISTORTION = 18 |
| Total harmonic distortion. | |
| constant int | MASS = 19 |
| Mass. | |
| constant int | ELECTRICAL_RESISTANCE = 20 |
| Electrical resistance. | |
| constant int | FLUX = 21 |
| Flux (mass per time, e.g. water flow) | |
| constant int | LUMINOUS_INTENSITY = 22 |
| Luminous intensity. | |
| constant int | ACCELERATION = 23 |
| Acceleration. | |
| constant int | MAGNETIC_FLUX_DENSITY = 24 |
| Magnetic flux density. | |
| constant int | ELECTRIC_FIELD_STRENGTH = 25 |
| Electric field strength. | |
| constant int | MAGNETIC_FIELD_STRENGTH = 26 |
| Magnetic field strength [uses NormelAlarmedState mapping if of DISCRETE_ON_OFF type]. | |
| constant int | ANGLE = 27 |
| Angle (e.g. phase angle) | |
| constant int | SELECTION = 28 |
| Selected index (one of n) | |
| constant int | FAULT_STATE = 29 |
| Fault state [uses NormalAlarmedState mapping if of DISCRETE_ON_OFF type]. | |
| constant int | POWER_QUALITY = 30 |
| Power quality. | |
| constant int | ROTATIONAL_SPEED = 31 |
| Rotational speed (e.g. fan speed) | |
| constant int | LUMINOUS_ENERGY = 32 |
| Luminous energy. | |
| constant int | LUMINOUS_FLUX = 33 |
| Luminous flux. | |
| constant int | ILLUMINANCE = 34 |
| Illuminance used for light incident on a surface. | |
| constant int | LUMINOUS_EMITTANCE = 35 |
| Luminous emittance used for light emitted from a surface. | |
| constant int | MOTION = 36 |
| Motion detection. | |
| constant int | OCCUPANCY = 37 |
| Occupancy detection [uses NormalAlarmedState mapping]. | |
| constant int | TAMPER = 38 |
| Tamper detection [uses NormalAlarmedState mapping]. | |
| constant int | DRY_CONTACT = 39 |
| Dry contact (actuator) [uses OnOffState mapping]. | |
| constant int | POWERED_DRY_CONTACT = 40 |
| Powered dry contact (actuator) [uses OnOffState mapping]. | |
| constant int | ABSOLUTE_HUMIDITY = 41 |
| Absolute humidity. | |
| constant int | DOOR_STATE = 42 |
| Door state [uses OpenClosedState mapping]. | |
| constant int | DOOR_LOCK_STATE = 43 |
| Door lock state [uses OpenClosedState mapping]. | |
| constant int | DOOR_HANDLE_LOCK = 44 |
| Door handle switch [uses OpenClosedState mapping]. | |
| constant int | CREST_FACTOR = 45 |
| Crest factor. | |
| constant int | DISTANCE = 46 |
| Distance. | |
| constant int | LENGTH = 47 |
| Length. | |
| constant int | UNBALANCE_VOLTAGE = 48 |
| Voltage unbalance. | |
| constant int | PARTICLE_DENSITY = 49 |
| Particle Density. | |
| constant int | DEW_POINT = 50 |
| Dew Point. | |
| constant int | ELECTRICAL_IMPEDANCE = 51 |
| Electrical impedance. | |
| constant int | TS_BYPASS_STATE = 52 |
| Transfer switch bypass state. | |
| constant int | BATTERY_LEVEL = 53 |
| Battery level. | |
| constant int | NONE = 0 |
| Sensor unit | |
| constant int | VOLT = 1 |
| Electric Potential, Volts (V) | |
| constant int | AMPERE = 2 |
| Electric Current, Amperes (A) | |
| constant int | WATT = 3 |
| Electric Power, Watts (W) | |
| constant int | VOLT_AMP = 4 |
| Electric Capacity, Volt Amperes (VA) | |
| constant int | WATT_HOUR = 5 |
| Active Energy, Watt hours (Wh) | |
| constant int | VOLT_AMP_HOUR = 6 |
| Apparent Energy, Volt-Ampere hours (VAh) | |
| constant int | DEGREE_CELSIUS = 7 |
| Temperature, Celsius (deg C) | |
| constant int | HZ = 8 |
| Frequency, Hertz (Hz) | |
| constant int | PERCENT = 9 |
| Ratio, Percent (%) | |
| constant int | METER_PER_SEC = 10 |
| Speed, Meters per second (m/s) | |
| constant int | PASCAL = 11 |
| Pressure, Pascal (Pa) | |
| constant int | G = 12 |
| Acceleration, G-force (g) | |
| constant int | RPM = 13 |
| Rotation, Revolutions per minute (rpm) | |
| constant int | METER = 14 |
| Distance, Meters (m) | |
| constant int | HOUR = 15 |
| Time, Hours (h) | |
| constant int | MINUTE = 16 |
| Time, Minutes (min) | |
| constant int | SECOND = 17 |
| Time, Seconds (s) | |
| constant int | VOLT_AMP_REACTIVE = 18 |
| Reactive Power, Volt Amperes reactive (var) | |
| constant int | VOLT_AMP_REACTIVE_HOUR = 19 |
| Reactive Energy, Volt Ampere reactive hours (varh) | |
| constant int | GRAM = 20 |
| Mass, Gram (g) | |
| constant int | OHM = 21 |
| Resistance, Ohm (omega, R) | |
| constant int | LITERS_PER_HOUR = 22 |
| Flow, Liters per hour (l/h) | |
| constant int | CANDELA = 23 |
| Luminous Intensity, Candela (cd) | |
| constant int | METER_PER_SQUARE_SEC = 24 |
| Acceleration, Meter per square second (m/s^2) | |
| constant int | METER_PER_SQARE_SEC = 24 |
| Typo, preserved for backward compatibility. | |
| constant int | TESLA = 25 |
| Magnetic Flux Density, Tesla (T) | |
| constant int | VOLT_PER_METER = 26 |
| Electric Field, Volt per meter (V/m) | |
| constant int | VOLT_PER_AMPERE = 27 |
| Resistance, Volt per ampere (V/A) | |
| constant int | DEGREE = 28 |
| Angle, Degrees (deg) | |
| constant int | DEGREE_FAHRENHEIT = 29 |
| Temperature, Fahrenheit (deg F) | |
| constant int | KELVIN = 30 |
| Temperature, Kelvin (K) | |
| constant int | JOULE = 31 |
| Energy, Joules (J) | |
| constant int | COULOMB = 32 |
| Electric Charge, Coulombs (C) | |
| constant int | NIT = 33 |
| Luminance, Nits (cd/m^2) | |
| constant int | LUMEN = 34 |
| Luminous Flux, Lumen (lm) | |
| constant int | LUMEN_SECOND = 35 |
| Luminous Energy, Lumen second (lm s) | |
| constant int | LUX = 36 |
| Luminous Flux, Lux (lx) | |
| constant int | PSI = 37 |
| Pressure, Pounds per square inch (psi) | |
| constant int | NEWTON = 38 |
| Force, Newtons (N, J/m) | |
| constant int | FOOT = 39 |
| Distance, Feet (ft) | |
| constant int | FOOT_PER_SEC = 40 |
| Speed, Feet per second (ft/s) | |
| constant int | CUBIC_METER = 41 |
| Volume, Cubic meters (m^3) | |
| constant int | RADIANT = 42 |
| Angle, Radians (rad) | |
| constant int | STERADIANT = 43 |
| Solid Angle, Steradians (sr) | |
| constant int | HENRY = 44 |
| Inductance, Henries (H, Vs/A, Ohm s) | |
| constant int | FARAD = 45 |
| Capacitance, Farads (F) | |
| constant int | MOL = 46 |
| Substance Quantity, Moles (mol) | |
| constant int | BECQUEREL = 47 |
| Radiation, Becquerels (Bq) | |
| constant int | GRAY = 48 |
| Radiation, Grays (Gy, J/kg) | |
| constant int | SIEVERT = 49 |
| Radiation, Sieverts (Sv = J/kg) | |
| constant int | G_PER_CUBIC_METER = 50 |
| Density, Grams per cubic meter (g/m^3) | |
| constant int | UG_PER_CUBIC_METER = 51 |
| Density, Micrograms per cubic meter (µg/m^3) | |
Additional Inherited Members | |
Public Types inherited from sensors::Sensor | |
| enum | OnOffState { OFF , ON } |
| Sensor states for DISCRETE_ON_OFF sensors. More... | |
| enum | OpenClosedState { OPEN , CLOSED } |
| enum | NormalAlarmedState { NORMAL , ALARMED } |
| enum | OkFaultState { OK , FAULT } |
Overcurrent protector trip sensor interface.
Definition at line 15 of file TransferSwitchBypassStateSensor.idl.
| void pdumodel::TransferSwitchBypassStateSensor::acknowledgeFault | ( | ) |
Acknowledge communication fault as expected.
If a bypass was present in the unit and later on removed, the STATE_FAULT bit will be set in the bypass state. If removing the bypass happened deliberately, this method can be used to reset the state back to 'unavailable' until the bypass is added to the unit again.
| constant int pdumodel::TransferSwitchBypassStateSensor::STATE_ACTIVE_INLET_MASK = 0x7 |
Active inlet, can be 0 (off), 1 or 2.
Definition at line 17 of file TransferSwitchBypassStateSensor.idl.
| constant int pdumodel::TransferSwitchBypassStateSensor::STATE_FAULT = 0x10 |
If set, communication to the bypass controller failed unexpectedly.
Definition at line 19 of file TransferSwitchBypassStateSensor.idl.
| constant int pdumodel::TransferSwitchBypassStateSensor::STATE_IS_BYPASS_SELECTED = 0x8 |
Whether the "bypass" position is selected.
Definition at line 18 of file TransferSwitchBypassStateSensor.idl.